Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
312
Lake Controller Operation Manual Rev 1.6.0
Preset Manager
It is recommended to Exclude Labels on all Presets when transferring
the same Presets or Bank Files to multiple devices. If Exclude Labels is
not set, the device’s Frame Label and Dante device name will change
during Preset Recall to the value present when the Preset was created.
27.4.1 Creating a New Bank File
A new empty bank le is created by tapping NEW BANK [F3]. This button is available only when the
COMPUTER column is selected, column A by default.
After entering a bank le name, either double-tap the bank le in column A, or select the bank le and tap
OPEN [F1]. The empty bank le is shown in column B.
A bank le can also be created by dragging an online Frame (column C) into column A (or vice versa). This
bank le contains all presets from the dragged Frame, and thus may not be empty. An automatic name is
set for that bank le.
Figure 27-6 shows a bank le containing four presets with varying Lock and Exclude Label statuses.
Figure 27-6: Open Bank File in Default Presets Folder