Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.6.0
Preset Manager
315
Figure 27-7: Transferring Presets from a Device to a Bank File
In this example, les are copied from the device to the computer (bank le) and will appear in the destina-
tion column as shown on column B in Figure 27-8 once the transfer is complete. Bank le presets can be
transferred in the same way as indicated below.
Figure 27-8: Transferring Presets from a Bank File to a Device
The Exclude Labels setting is set automatically
when transferring presets between a bank file and
an online frame.
27.4.5 Bank Filename Extensions
Each Lake device has a unique le extension for Bank les as shown in Table 27-1.