Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
50
Lake Controller Operation Manual Rev 1.5.8
Lake Controller Tutorial
Figure 4-36: Comparison of Raised Cosine (blue) and Traditional Third-Octave (red)
4.4.4 EQ Overlays
The concept of EQ overlays is another innovative Lake feature. Tap the PEQ1 tab at the top of the screen.
PEQ1, BLEQ2 and GEQ3 are all different EQ overlays. The white line represents the composite response of
all EQ overlays. A grey line, if visible separate from the white line, indicates the EQ response for the selected
overlay only.
With the PEQ1 screen selected in Figure 4-1 on page 27, the white line (composite curve) indicates the
wide band 6 dB boost created in the GEQ3 overlay. The next section illustrates how multiple EQ overlays
interact.
4.4.5 Parametric EQ
To add a Parametric lter to the PEQ1 overlay:
1. Tap the Parametric lter at top of the EQ display.
2. Tap the screen near 125 Hz to insert the lter there.