Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.8
Lake Controller Tutorial
55
to split the crossover, and drag the CROSSOVER SELECTor tool left to reduce the frequencies sent to the
low output.
Figure 4-47: Splitting and moving the low channel HPF
Parametric lters (with the exception of the Mesa lter) can be added to further modify the crossover. Add a
Parametric lter near the center frequency of the low-output crossover.
Figure 4-48: Adding a Parametric EQ to the low channel
The full response of the Parametric lter is shown in blue, but the Parametric lter affects only the output it
is associated with. The solid white line shows the resulting crossover curve for the low output.
Tap the CROSSOVER SELECT button to display the crossover scroll bar, from which you can select various
standard crossover types. If crossover sections are combined, the new CROSSOVER SELECTion is applied
to both sides of the selected crossover. If crossovers are split, the CROSSOVER SELECTion applies only to
the currently selected output.
To change the crossover type to a 48 dB Linkwitz-Riley:
1. Tap the 1.6 kHz lter box to select that crossover.
2. Tap CROSSOVER SELECT.
3. Select 48 dB Linkwitz/Riley from the scroll bar.
4. Tap CROSSOVER SET.