Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 9. Module File Types & Lake LoadLibrary™
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
4
Lake Controller Operation Manual Rev 1.5.8
Welcome
▸ Chapter 26, Firmware Update, presents the methods in which you can update the rmware of your
Lake device using the associated Firmware Update Utilities.
▸ Chapter 27, Preset Manager, provides information on using the separate Preset Manager utilities that
are provided in the Lake Controller software suite.
▸ Chapter 28, IP Address Reference, provides reference information for conguring IP addresses for the
Lake Controller and Lake device network.
If you are using the Controller for the rst time, please read the tutorial in chapter 4 to become familiar with
the features and terminology. For information on Lake device hardware and front panel functionality, please
refer to the associated operation manuals.
The information in this manual is based on the use of a touchscreen Tablet PC, which utilizes a pen interface
instead of a mouse. Therefore the word TAP is used instead of CLICK when referring to tapping the pen on
the screen, which is equivalent to clicking the left mouse button. If you are using a mouse instead of a pen,
substitute a click of your left mouse button when instructed to tap.