Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.8
EQ/Levels Menu Reference
89
The FILTER EDIT box of a bypassed lter is positioned slightly lower than an active lter’s edit box and does
not have a yellow border when selected.
A filter can be bypassed/inserted by dragging the
filter edit box down (bypass) or up (insert).
6. 3.12 Filter Flat
Tap FILTER FLAT to atten the selected lter. This sets the lter gain to zero, but frequency and bandwidth
remain unchanged.
FILTER FLAT is inactive if the selected overlay does not contain any lters.
6. 3.13 Filter Delete
Tap FILTER DELETE to remove the selected lter from the overlay.
A PEQ filter can be deleted by dragging the filter box
upward off the screen
FILTER DELETE is inactive if the selected overlay is a:
▸ Graphic EQ, because its lter points are xed and cannot be deleted
▸ Parametric EQ overlay without any lters
6. 3.14 Analyzer Tap to Search
The Lake Controller can interface directly with certain audio analyzer software programs that are installed on
the same computer, or on another computer on the same network.
When the analyzer is enabled, and a compatible audio analyzer is online and on the same network, the
Lake Controller provides spectrum, spectrograph, and transfer function displays on the XOVER, Aux, and EQ
overlays.