Lake Controller Operation Manual

104
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
6.4.8 Crossover/HPF/LPF Select
6.4.8.1 Crossover Select
This button reads CROSSOVER SELECT and is active only when a crossover lter box is selected on a
Classic crossover or a Linear Phase 2/3-Way. This function is not available for the Linear Phase Brick Wall
4-Way Module.
Tap CROSSOVER SELECT to display a scroll bar containing available crossover types. For a Classic cross-
over, the following scroll bar displays.
Figure 6-20: Classic Crossover Selection
For a Linear Phase 2-/3-Way crossover, the following scroll bar displays.
Figure 6-21: Linear Phase 2/3-Way Crossover Selection
To change the crossover type:
1. Tap a crossover lter box, then tap CROSSOVER SELECT.
2. Drag the scroll bar left or right, and tap the desired crossover.
3. Tap CROSSOVER SET, then YES to the warning message.
6.4.8.2 HPF Select
This button reads HPF SELECT and is active only when a high-pass lter box is selected. Follow the process
described for CROSSOVER SELECT to set the high-pass lter.