Lake Controller Operation Manual
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
105
6.4.8.3 LPF Select
This button reads LPF SELECT and is active only when a low-pass lter box is selected. Follow the process
described for CROSSOVER SELECT to set the low-pass lter.
The LPF is enabled via the HPF/LPF FUNCTIONS
menu.
6.4.9 HPF Set/LPF Set/Crossover Set/Filter Bypass/Filter Insert
This button has various states depending on the status of the selected lter. For further details, refer to
section 6.4.8.
6.4.9.1 HPF Set
The button reads HPF SET when a high-pass lter has been selected from the HPF SELECT scroll bar.
6.4.9.2 LPF Set
This button reads LPF SET when a low-pass lter has been selected from the LPF SELECT scroll bar.
6.4.9.3 Crossover Set
This button reads CROSSOVER SET when a crossover lter has been selected from the
CROSSOVER SELECT scroll bar.
CROSSOVER SET is not applicable for the Linear
Phase Brick Wall 4-Way crossover.
6.4.9.4 Filter Bypass/Filter Insert
This button reads FILTER BYPASS when a Parametric lter is selected, or when a crossover lter has been
split. For Parametric EQ lters, select the lter box and tap FILTER INSERT / FILTER BYPASS to activate or
deactivate the selected lter.
A crossover HPF/LPF lter can be disabled by splitting the crossover and tapping FILTER BYPASS, followed
by OK on the warning conrmation dialog.