Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
111
5. Select the HPF by tapping its lter box located top left of the screen.
6. Select the 18dB BUTTERWORTH lter from scroll bar.
7. Tap FILTER SET, then YES to the warning message.
8. Tap AUX OUTPUT EXIT to return to the EQ/LEVELS menu.
Steep high-pass and low-pass lters (48 dB) require
more EQ resources than shallower slopes (6 dB).
6.5.5 Auxiliary Output Menu Options
The menu options shown in Figure 6-27 are available when an EQ lter is selected on an Auxiliary Output in
the EQ/Levels section of an Auxiliary Output Module.
Figure 6-27: Auxiliary Output Button Bar
A summary of the functions relevant to Auxiliary Outputs is shown below; many are identical to those used
on the EQ and XOVER screens.
6.5.5.1 Home
Navigate back to the HOME menu.
6.5.5.2 EQ/Levels EXIT
Navigates to HOME menu, or I/O CONFIG if the current screen accessed via interactive block diagram.
6.5.5.3 Aux Output Functions
Provides EQ preferences, high-pass and low-pass lter options, and OVERLAY COPY/PASTE (and overlay
access controls in Designer Mode).
6.5.5.4 Aux Output Flat
Deletes all EQ lters and disables HPF, and LPF lters on the selected auxiliary output channel.