Lake Controller Operation Manual

146
Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
Simplied View Input Toggle (MY8-LAKE Mesa Mode Only)
For an MY8-LAKE in Mesa Mode, the default I/O conguration view is set to Simplied View. In this view,
either the Host output or AES input can be selected as the source input signal. The Input Mixer and Input
Router are not available; the input selector toggles between Host Output and AES Input.
Figure 8-22: MY8-LAKE Simplied View Input Mixer
Please refer to section 22.4 for further information on Simplied View.
8.2.8 Output Conguration
The Output Conguration window is displayed either after tapping the zoom button located to the right
of each output on the right side of the I/O CONFIG page, or after loading a Module le. The automatic
display of the Output Conguration following a Module Recall can be enabled or disabled from this screen.
A summary of the output connections for each Module appears at the bottom of each Module cell on the
I/O CONFIG page.
Figure 8-23: Output Conguration Zoom Button
After tapping any of these zoom buttons, an Output Conguration window is displayed, which looks similar
to that shown in Figure 8-24. The options and number of channels available on this screen depend on the
type of Lake device currently selected.