Lake Controller Operation Manual

160
Lake Controller Operation Manual Rev 1.7.0
Modules Menu Reference
8.4.4 Complete Replace
This button completes the REPLACE FRAME function. This function is active only when the REPLACE
button is selected and a destination Module has been selected from the Module scroll bar.
Data from the source Frame is transferred to the destination Frame and the Frame from the scroll bar will
now take the place of the source Frame in the system conguration.
If the source Frame is online, all Modules in the work area are returned to the scroll bar.
If a 2xContour module is replaced with a 4xContour module PLM+
or D Series, it is recommended to enable “Enable #Unused Page”.
This will move the unused module C&D to a new #Unused page.
Any module(s) on this page will not be displayed on the ALL page.
8.4.5 Batch Replace
This button is active (blue) regardless of whether a Module is selected in the work area. When tapped a
screen similar to Figure 8-30 is displayed.
The left side of the screen displays ofine or Virtual Frames present in the main work area. The right side of
the screen displays available online Frames on the scrollbar.
To complete the BATCH REPLACE, all online
destination Frames must be on the Module scroll
bar, and not currently in use in the work area.
Please refer to section 8.4.3.1 for detailed
information on Frame Replace rules and compat-
ibility.
Frames are sorted by Frame type (product/conguration), then by Frame name. If the product type and
Frame name match between an online and ofine Frame, a number will automatically be assigned to the
destination Frame.
Pressing the ME/SEL button on the front panel will identify the selected destination Frame with yellow
highlighting.
Please refer to the notes in section 8.4.3 for rules relating to which products are compatible with each other
for Batch Frame Replace.
If a 2xContour module is replaced with a 4xContour module PLM+
or D Series, it is recommended to enable “Enable #Unused Page”.
This will move the unused module C&D to a new #Unused page.
Any module(s) on this page will not be displayed on the ALL page.