Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.7.0
Groups Menu Reference
191
To gang the crossover or HPF/LPF of all Modules in a Group, perform the following steps:
1. Assign the Modules to a Group. All Modules must be of the same crossover type, such as Classic
3-Way (CL3way), for example.
All Modules must be of the same Module type,
such as a Classic 3-Way (CL3way), for example.
2. From the GROUPS menu, tap GANG.
3. Tap the Module on the scroll bar to select which Module’s settings will be transferred to all other
Modules in the Group.
4. Tap GANG XOVER/AUX (Contour Modules) or GANG HPF/LPF (Mesa EQ Modules).
5. Tap YES to the warning message.
Only the XOVER/AUX/HPF/LPF and associated
OUTPUT EQ data is ganged. LEVELS data and
INPUT EQ (PEQ/BLEQ/GEQ) cannot be ganged.
Use Group EQ/LEVELS to control multiple Modules.
To synchronize all data across multiple Modules,
you can use the powerful SUPER MODULE
feature. Refer to section 8.8 for details.
10.8 Add Page
The ADD PAGE function is always available from the GROUPS menu and creates additional pages that help
manage large systems with many Module and Group icons.
10.9 Discovering Module Group Assignments
While inside the Group menu:
▸ It is possible to tap on a Group on work area and all Modules assigned to the group will have the
Module icon’s border illuminate yellow.
▸ It is also possible to tap on a Module and the Group(s) the Module is assigned to will have the icon’s
border illuminate yellow.
▸ It is possible to tap on a Group down on Scrollbar and all Modules assigned to the group will have the
Module icon’s border illuminate yellow.