Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.7.0
MY8-LAKE Reference and Operation
285
Figure 22-5: Analog Output Reference Options
The limiter compensation is active only on Host input channels (Host returns) from Contour Module outputs;
outputs from Mesa Modules, or other output types will not have this compensation applied.
22.4 I/O Conguration View Mode Options
22.4.1 Simplied View (not yet implemented)
The MY8-LAKE provides a simplied I/O routing view by default for Mesa Mode that allows simple congu-
ration of all input and output parameters. In Simplied View, the following functionality differs compared to
normal Lake Controller operation:
▸ The Digital Clock Conguration screen is disabled; the clock signal is locked by default to the same
clock as the selected input source (i.e. Host Output or AES Input). Summary data is still displayed
conrming the current automatic selection.
▸ The INPUT CONFIGURATION screen is disabled; the input type selected via the Input Toggle (Host
Output or AES Input) is set as Priority 1 for the selected Module and corresponding input (i.e. Module A
Input = Host Out 1 or AES In 1, Module B In = Host Out 2 + AES In 2, etc.)
▸ The Output Conguration screen is disabled; the Module is set to pass the processed signal to the
corresponding Host Input and AES Output (i.e. Module A = Host In 1 + AES Out 1,
Module B= Host In 2 + AES Out 2, etc.)