Manualshelf

Lake Controller Operation Manual

ManualsBrandsLab Gruppen ManualsAudio EquipmentPower Amplifiers with DSP and Network
301302303304305306307308309310
300
Lake Controller Operation Manual Rev 1.7.0
Keyboard Shortcuts
▸ [SHIFT] or [CAPS LOCK] + DOWN ARROW: Decreases the gain of the selected PEQ lter (Coarse).
▸ [Q]: Increases bandwidth of selected lter, or the lowest frequency segment of a Mesa lter (Fine).
▸ [SHIFT] or [CAPS LOCK] + [Q]: Increases bandwidth of selected lter, or the lowest frequency segment
of a Mesa lter (Coarse).
▸ [W]: Decreases bandwidth of selected lter, or the lowest frequency segment of a Mesa lter (Fine).
▸ [SHIFT] or [CAPS LOCK] + [W]: Decreases bandwidth of selected lter, or the lowest frequency seg-
ment of a Mesa lter (Coarse).
▸ [A]: Increases the high bandwidth of a selected Mesa lter (Fine).
▸ [SHIFT] or [CAPS LOCK] + [A]: Increases the high bandwidth of a selected Mesa lter (Coarse).
▸ [S]: Decreases the high bandwidth of a selected Mesa lter (Fine).
▸ [SHIFT] or [CAPS LOCK] + [S]: Decreases the high bandwidth of a selected Mesa lter (Coarse).
▸ [CTRL] + [Q]: Moves the low-frequency segment of a Mesa lter to the left.
▸ [CTRL] + [W]: Moves the low-frequency segment of a Mesa lter to the right.
▸ [CTRL] + [A]: Moves the high-frequency segment of a Mesa lter to the left.
▸ [CTRL] + [S]: Moves the high-frequency segment of a Mesa lter to the right.
24.4.3 BLEQ Overlay Shortcuts
▸ [E]: Enables FILTER EDIT mode for the manual entry of gain/freq/bandwidth via a keyboard
▸ [G]: The gain value for the selected lter is displayed in the on-screen keyboard.
▸ [F]: The frequency value of the selected lter is displayed in the on-screen keyboard.
▸ [CTRL] + [F]: The high-frequency value of a selected Mesa lter is displayed in the on-screen keyboard.
▸ [B]: The bandwidth value of the selected lter is displayed in the on-screen keyboard.
▸ [[CTRL] + [B}: The high-bandwidth of the selected Mesa lter is displayed in the on-screen keyboard.
▸ [<]: Moves the center frequency of the selected lter to the left (Fine).
▸ [SHIFT] or [CAPS LOCK] + [<] : Moves the center frequency of the selected lter to the left (Coarse).
▸ [>]: Moves the center frequency of the selected lter to the right (Fine).
▸ [SHIFT] or [CAPS LOCK] + [>]: Moves the center frequency of the selected lter to the right (Coarse).
▸ LEFT ARROW: Selects the lter to the left of the currently selected lter.
▸ RIGHT ARROW: Selects the lter to the right of the currently selected lter.
▸ UP ARROW: Increases the gain of the selected lter (Fine).