Lake Controller Operation Manual
Lake Controller Operation Manual Rev 1.7.0
Preset Manager
321
28.4.3.1 Clear Preset [F4]
Deletes the selected presets from the bank le.
28.4.3.2 Rename Preset [F5]
Renames the selected preset in the bank le.
28.4.3.3 Select Multiple [F6]
Allows the selection of multiple items using multiple single tap actions; equivalent to holding down [CTRL]
on a keyboard.
28.4.3.4 Set Bank Password/Change Password [F7]
Sets or changes the password for the selected bank le. When a password is set, a lock icon is displayed
next to the bank le and on any locked Presets. Bank le and Frame passwords follow the same logic.
To remove an existing password, tap
CHANGE PASSWORD, enter the current password,
then tap OK twice.
28.4.3.5 Lock / Unlock Preset [F8]
Locks or unlocks the selected preset/s in a bank le as described in section 28.3.2.7.
28.4.3.6 Exclude / Include Labels [F8]
Sets the Exclude / Include Labels function for the selected Preset/s as described in section 28.3.2.8.
28.4.4 Transferring Presets between Bank Files and Devices
To transfer Presets between Devices and Bank Files, select the Preset/s and drag between column B and
column D as shown in Figure 27-7.