Lake Controller Operation Manual

32
Lake Controller Operation Manual Rev 1.7.0
Lake Controller Tutorial
Figure 4-10: Module Scroll bar
Figure 4-11 shows the Module scroll bar displaying Virtual Frames for Lake-enable devices, after accessing
the Virtual Frame folder.
Figure 4-11: Module Scroll bar - Virtual Frames
To place an online Frame in the work area for use during this tutorial:
1. Tap the Module button to display the Module scroll bar as shown in Figure 4-11
2. Tap one of the gray circles (which indicates an available online Frame)
The cursor takes on the form of the selected frame.
3. Place the selected Frame in the work area by tapping in the required location.
An LM 26 (Contour Mode) and an LM 44 (Mesa Mode) are used for most examples in this tutorial; the
resulting screen will look similar to that shown in Figure 4-12, depending on the product you are using.