Lake Controller Operation Manual

48
Lake Controller Operation Manual Rev 1.7.0
Lake Controller Tutorial
3. Tap Graphic EQ.
A GEQ3 overlay will appear showing a 28-band Graphic EQ with third octave lters. The bottom section of
the Graphic EQ screen contains the EQ Tool, which is used to select a frequency band for gain adjustment.
Figure 4-34: EQ Selector Tool
4. To select a frequency band, tap and drag the selector left or right. To adjust gain of the selected lter,
tap the red rotating X and slide up to boost or down to cut.
If Frequency Lock is off (blue), the frequency can
also be selected and changed by directly tapping
and dragging a yellow X lter point on the EQ
interface.
Figure 4-35: Graphic EQ Screen
5. Tap Filter Flat on the button bar to atten the selected lter.
Many other features are available on the EQ button bar; please refer to chapter 6 for further details.