Lake Controller Operation Manual
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
77
6. 2.7.3 AmpClip Reference
Tap the AMPCLIP REFERENCE button to view output signals with respect to the AmpClip reference level.
Tap again to return to the normal view, which is relative to the factory MaxRMS level as dened using
Designer Mode.
When AMPCLIP REFERENCE is selected, the Amp Clip level is used as the reference for the 0 dB level on
the meter. With correct settings, the output meter will identify the onset of clipping.
AMPCLIP REFERENCE is a global function; all meters throughout the system display the reference
selected here.
The Multiband Limiter band meters are always
MaxRMS.
6. 2.7.4 Assign Meters
The ASSIGN METERS function is active only when a Group levels page is accessed via a Group icon. For
metering purposes, a Module may be assigned to a Group. This provides an overview of the input/output
signals for that Group.
When a Group is created, the rst Module to be assigned to that Group is assigned to metering automati-
cally.
To assign a Module to a Group for metering purposes:
1. Access a Group LEVELS page through a Group icon.
2. Tap METER OPTIONS, then tap ASSIGN METERS.
3. The Module scroll bar appears displaying Modules assigned to the selected Group.
4. On the scroll bar, tap the Module you wish to use for metering.
5. Tap ASSIGN METERS again, then METER OPTIONS EXIT to exit this mode