Lake Controller Operation Manual
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
85
Label Function Description
A
Frequency Lock
A/B
Filter Edit
Refer to section 6.3.6 on page 85.
B Filter Box
Displays the frequency, bandwidth, and gain values of each lter.
Tap a lter box to select a particular lter.
Double-tap the lter box to switch to Fine Adjustment mode.
Drag the lter box down to bypass the lter.
Drag the lter box up to insert.
Drag the lter box off the top of the screen to delete.
C Frame & Module Label Describes the currently selected Module and status.
D EQ Curve A white line identies the overall EQ curve.
E EQ Tool Drag the EQ Tool left or right to select the frequency to change.
Table 6-5: Function Descriptions for Graphic EQ Screen
To adjust the Graphic EQ:
4. Select the lter point to adjust using the EQ Tool (E).
5. Drag the lter point up or down to increase or decrease gain.
If FREQUENCY LOCK (A) is inactive (BLUE), you can tap to select a lter point then drag up or down to
adjust the gain.
6.3.6 Input EQ On-Screen Functions
The following three functions are permanently available on all input EQ overlays in addition to those available
on the button bar at the bottom of the screen.
6.3.6.1 Frequency Lock
Frequency Lock provides an option to lock the selected frequency to ensure when dragging the lter point
up and down to change gain inadvertently change the frequency.
If FREQUENCY LOCK is blue then lter frequency is unlocked; the frequency is locked if the button is
orange. When locked, the frequency can be adjusted using the EQ Tool (J) or FILTER EDIT functionality.