Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
87
Figure 6-14: EQ/Levels Menu
EQ OVERLAY FUNCTIONS, immediately to the right of the EQ/LEVELS button, provides a submenu with
the following items:
Figure 6-15: EQ Overlay Functions Menu
6.3.7.1 EQ Overlay Properties/EQ Preferences
In User Mode, the only function active under the EQ OVERLAY PROPERTIES menu is EQ PREFERENCES,
which provides a submenu containing functions that control the view of the EQ scale and screens.
Separate settings can be stored for crossover EQ and input/auxiliary EQ. Therefore, most changes made
using EQ OVERLAY PROPERTIES/EQ PREFERENCES affect only the input and auxiliary output EQ scales.
Function Description
No Scale [F2] Removes the scale lines on all EQ/Crossover and Auxiliary screens.
Reset Scale [F3] Resets the EQ scale to the default setting of ±15 dB.
Zoom In [F4]
Zooms the EQ scale in by 3 dB increments (for example, if scale is ±15 dB,
tapping Zoom In will change the scale to ±12 dB).
Zoom Out [F5]
Zooms the EQ scale out by 3 dB increments (for example, if scale is ±15 dB,
tapping Zoom Out will change the scale to ±18 dB).
EQ Pref Exit [F6] Returns the previous menu level.
Full Response [F7]
Available only for Crossover and Auxiliary Output screens. When active
(orange), the overall EQ curve is shown taking into account all crossovers,
HPF, LPF, input and output EQ (and any loaded FIR for the XP module) for the
Module and any Groups it is assigned to. Not applicable for input EQ screens
(PEQ/BLEQ/GEQ).
Up [F8] Moves the zero line up in 3 dB increments.
Down [F9] Moves the zero line down in 3 dB increments.
Current OVLAY
Response
Available only for input EQ overlays (PEQ/BLEQ/GEQ). Enable (orange) by
default. When enabled, a grey line is displayed for the selected EQ overlay
to show EQ response for the current overlay only. The white line (overall EQ
composite curve) remains present at all times.
Table 6-6: Function Descriptions for EQ Preferences Menu