Lake Controller Operation Manual

90
Lake Controller Operation Manual Rev 1.7.0
EQ/Levels Menu Reference
6.3.8.1 A/B Overlay Compare
In addition to the bypass feature, you can compare two overlays within a Module or Group. The two ways to
create an A/B comparison are described in the following sections.
6.3.8.2 Using the A/B Button
The A/B button at the top left of the screen creates a bypassed copy of the selected overlay. Changes can
then be made to one of the overlays, and compared by tapping EQ OVERLAY COMPARE, or just pull down
on the inserted overlay and it will switch with the other overlay.
6.3.8.3 Comparing Existing Overlays
Follow this process to compare two existing EQ overlays:
1. Tap overlay A to select it.
2. Tap EQ OVERLAY BYPASS. Overlay A moves to the bottom of the screen.
3. Tap and drag overlay A left or right along the bottom of the screen until it is aligned directly underneath
the EQ overlay you wish to compare.
4. Tap EQ OVERLAY COMPARE.
Each time the button is tapped, the two overlays switch positions; the top overlay is active and the bottom
is bypassed.
6.3.9 EQ Overlay Store/Recall
The EQ Overlay Store/Recall button opens a submenu containing functions relating to storing and recalling
EQ overlays.
6.3. 9.1 Recall As New
Selecting a previously stored EQ Overlay le and tapping RECALL AS NEW loads the selected EQ Overlay
le as a new additional EQ Overlay. A module can have up to eight EQ Overlays, and a Group can have up to
four EQ Overlays.
6.3.9.2 Recall
Selecting a previously stored EQ Overlay le and tapping RECALL (or double-tapping the icon) loads the EQ
Overlay into the currently selected EQ Overlay, replacing all settings.