Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.4
System Store Recall Menu Reference
109
7.3 Recall as New System—Open
The function and label of the button depend on whether a folder or le is selected. The button is inactive
when neither a le nor folder is selected.
The button is labeled OPEN when a folder is selected.
To open a folder:
1. Tap the desired folder icon
The selection is indicated by a yellow border.
2. Tap OPEN. Double-tapping the folder icon also opens the folder.
The button is labeled RECALL AS NEW SYSTEM when a le is selected; recalling the le will clear all
current settings from the Controller and load the details stored in the le into the associated devices.
To recall a system conguration le as a new system:
1. Tap the desired le to recall.
2. Tap RECALL AS NEW SYSTEM.
3. Conrm the action by tapping the YES button on the warning message.
RECALL AS NEW SYSTEM overwrites current settings
in associated Lake devices and will affect audio
processing. Presets stored in hardware devices are not
overwritten during a system le recall.
7.4 Recall as Subsystem
RECALL AS SUBSYSTEM enables the content of a system conguration le to be added to the current
system conguration.
This function adds the Modules, Super Modules, and Groups to your current conguration, or replaces
the data if the device is already in use. This function does not automatically arrange icons so they do not
overlap. Be careful to either move existing icons before loading a sub-system, or ensure icons are placed
appropriately in the stored les.
7.5 Recall Compare
RECALL COMPARE enables comparison of a system conguration le with the system conguration that is
currently active in the Lake device. This button is active only when a le is selected.