Lake Controller Operation Manual

150
Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
1. Tap the Module icon that contains the data to copy.
2. Tap COPY.
8.4.2 Paste
This function is active only when Module data has been previously copied and a destination Module icon is
selected. To paste data to a Module:
1. Tap the Module icon in which to paste the data.
2. Tap PASTE.
A Mesa EQ Module cannot be pasted into a
Contour Module and vice versa.
8.4.3 Replace Frame
The REPLACE function allows transfer of Module/Super Module/Group data between devices. If a previ-
ously used device is unavailable, or the device that performs a task is required to change, follow these
steps:n
1. Tap COPY/PASTE/REPLACE from the Modules menu.
2. Tap a Module from the Frame you wish to replace on the work area.
3. Tap REPLACE FRAME
The Module scroll bar displays used and unused Modules.
4. Tap a Module from an unused Frame then tap COMPLETE REPLACE.
To locate a particular device, tap the SEL button on the front panel to center the unit on the scroll bar:
▸ LM Series | Press the top-left dynamic function button on the front panel
▸ PLM Series | Press the second dynamic function button down on the left on the front panel
▸ PLM+ Series | Press the top-left dynamic function button on the front panel
▸ D Series | Press the SELECT button to the far-right of the front panel