Lake Controller Operation Manual

154

Lake Controller Operation Manual Rev 1.5.4

Modules Menu Reference

Double-tapping a folder or le icon also opens the

folder or le.

The button is labeled RECALL when a le is selected. To recall a Module le, tap the desired le, then tap

RECALL. Conrm the action by tapping YES to the warning message. By default the Output Conguration

screen is displayed to enable conrmation of output routing - this setting can be changed by toggling the

option on the Output Conguration screen.

Figure 8-31: Recalling a Module File

Recalling a Module le overwrites all data currently

stored in the selected Module and removes the

Module from any Groups.

EAW

Greybox

le (.gyx) may also be recalled

directly into the Modules of Lake-enabled

ampliers. Please refer to chapter 9 for further

details.

8.6.2 Store

The STORE button stores over an existing le. This button is active only when a le is selected.

1. Tap an existing le to store over (overwrite).

2. Tap STORE.

3. Conrm the action by tapping the YES button in the warning message.

If the selected le is set to READ ONLY, the STORE

function is gray (inactive).

8.6.3 New Store

The NEW STORE button stores the current Module conguration under a new le name.