Lake Controller Operation Manual
226
Lake Controller Operation Manual Rev 1.5.4
Designer Mode Menu Reference
21. Tap the icon for Module B.
22. Tap the DEMO Module le on the scroll bar.
23. Tap RECALL, then YES to the warning message.
24. Exit Designer Mode to see the effect of the changes on Module A. Module B is already locked follow-
ing loading the Module le.
19.2.2.2 Summary
All data that can be stored and secured for a base conguration also can be stored and secured for Modules.
In addition, the Module can restrict access to input EQ overlays.
19.2.3 Security for Group Functions
Groups are used to connect and adjust multiple Modules. Groups cannot be locked or password-protected,
but individual EQ overlays can be hidden. Global Access settings also apply to Groups. Security for levels
and crossovers is not relevant for Groups.
A Group may contain various types of Modules, each with different security settings. Group levels, however,
are restricted by the level limits set for the Modules within the Group. For example, if changing a Group level
causes one or more Modules to exceed their minimum/maximum level limits, the action is not permitted.
19. 2.3.1 Group Tutorial
To add a Group to the conguration, perform the following steps:
1. From HOME, tap GROUPS.
2. Tap GROUP 1 from the GROUPS scroll bar, and tap again in the work area.
3. Tap ASSIGN, then tap the Module A and Module B icons.
4. Tap ASSIGN again to exit the Group Assignment mode.
5. Tap EQ/LEVELS and navigate to the PEQ1 page of Group 1.
To add PEQ and hide the overlay, perform the following steps:
6. Add a parametric lter (gain: –6 dB; frequency: 125 Hz; bandwidth: 1).
7. Tap EQ OVERLAY FUNCTIONS, then EQ OVERLAY PROPERTIES.