Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.4

EQ/Levels Menu Reference

Figure 6-5: AmpClip Level Indicators

6. 2.7.6 Level Limits

This function button is visible only in Designer Mode, and is used for setting minimum and maximum values

for all Levels attributes described in this chapter.

6.2.7.7 Adjust Factory

This function button is visible only in Designer Mode and is used for dening default level settings and level

limits for all attributes described in this chapter.

6.3 EQ

The Controller has two types of input EQ: Parametric EQ and Graphic EQ. Additional parametric output EQ

is available on the XOVER page and Aux tabs. This section deals with input EQ.

Groups and Modules can have multiple layers of EQ, called EQ overlays. Each Module can have up to eight

EQ overlays, and each Group can have up to four EQ overlays. A Module can have up to 256 input EQ lters

distributed amongst these EQ overlays. The large number of lters is necessary in order to allow for sophis-

ticated Grouping of Graphic EQ overlays. Input EQ Overlays can be stored and recalled from a le.

A Module’s overall input EQ response is calculated by combining its input EQ overlays with those of all

Groups to which that Module is assigned. The resulting composite EQ curve is indicated by a white line that

is displayed on all overlays.