Lake Controller Operation Manual
86
Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
3. Tap a le or folder to select it, then tap DELETE.
4. Conrm action by tapping YES in the warning message.
Deletion of a le is permanent and cannot be
restored using the UNDO function.
New Folder
This button creates a new folder in the current directory.
1. Navigate to the desired directory location and tap NEW FOLDER.
2. Enter the folder name, and tap OK.
6.3.9 EQ Overlay Flat
Tap EQ OVERLAY FLAT to atten and delete all lters from the selected overlay. This function is inactive if
the selected overlay does not contain any lters.
6. 3.10 Filter Bypass/Filter Insert
The button label changes depending on whether the selected lter is active or bypassed. The button reads:
FILTER BYPASS: If the lter is active; tap to bypass the lter.
FILTER INSERT: If the lter is bypassed; tap to insert the lter.
The FILTER EDIT box of a bypassed lter is positioned slightly lower than an active lter’s edit box and does
not have a yellow border when selected.
A lter can be bypassed/inserted by dragging the
lter edit box down (bypass) or up (insert).
6. 3.11 Filter Flat
Tap FILTER FLAT to atten the selected lter. This sets the lter gain to zero, but frequency and bandwidth
remain unchanged.