Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.4

EQ/Levels Menu Reference

▸ LOW OUTPUT HPF SETs the HPF to affect only the lowest output channel of the selected Module.

Applicable to Contour Modules only.

▸ HPF ENABLE enables/disables the HPF for the selected Module.

▸ LPF ENABLE enables/disables the LPF on the highest output channel for the selected Module.

INPUT HPF and LOW OUTPUT HPF are disabled for

the Linear Phase Brick Wall 4-Way Module. The

LP4way HPF is xed to INPUT HPF. Other Module

types, incl. LP2/LP3way provide the HPF option.

6.4.4.2 Crossover Hide

Available only in Designer Mode. When enabled (orange), the crossover page will be hidden when the

Module is locked, or after exiting from Designer Mode.

6.4.4.3 Crossover View Only

Available only in Designer Mode. When enabled (orange), the crossover page will be set as view only when

the Module is locked, or after exiting from Designer Mode.

6.4.4.4 EQ Preferences

This provides a submenu containing options regarding the view of the EQ scale.

6.4.4.5 Crossover Copy

Copies all crossover and EQ settings from the selected XOVER or HPF/LPF page.

6.4.4.6 Crossover Paste

Active only when a crossover or HPF/LPF page has previously been copied and the current Module is the

same type.

A crossover can only be pasted to a Module of the same number of channels and the same type. For

example, a Classic 3-Way crossover can only be pasted into another Classic 3-Way crossover; the HPF/

LPF of a Mesa EQ Module can only be pasted onto another Mesa EQ HPF/LPF page; and a Classic 4-Way

crossover cannot be pasted into a Linear Phase Brick Wall 4-Way.