Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.8
Lake-enabled Amplifier Reference
273
20.13.6 Global Dante Enabled Control
Two buttons, ON and OFF, control the Dante Enabled status of all devices that are online and present in the
current system conguration (not applicable for MY8-LAKE). A conrmation is required prior to changing this
status across all devices.
Both buttons will be blue if a combination of status are present, or one button will be orange if all devices
have the same status. Status indicators summarize the number of online devices in the current system
conguration that have this status set to ON or OFF.
Two additional buttons, 48 kHz and 96 kHz control the Dante sample rate for all Dante-enabled devices in
the current system conguration.
20.13.7 Global Dante Transmit Enabled Control
Two buttons, ON and OFF, control the Dante Transmit Enabled status of all devices that are online and
present in the current system conguration (not applicable for MY8-LAKE). A conrmation is required prior
to changing this status across all devices.
Both buttons will be blue if a combination of status are present, or one button will be orange if all devices
have the same status.
20.13.8 Global AES67 Enable Control (PLM+ and D Series only)
Two buttons, ON and OFF, control the AES mode on all supported devices present in the system congura-
tion. Unsupported devices are listed in the n/a counter. All devices with AES67 mode enabled are listed
under ON, and all devices with AES67 mode disabled are listed under OFF. Since devices are required to
re-start when AES67 mode is changed, during the re-start devices will be listed under Pending.
20.13.9 Global Auto Power Down Control (PLM+ and D Series only)
Two buttons, ON and OFF and additional status information describe how Auto Power Down is congured
for the devices in the current system conguration.
If Auto Power Down is enabled (ON), the selected device will automatically go into standby mode after the
denes number of minutes has been reached where the following criteria is met:
▸ No audio is passing
▸ No user interaction via Lake Controller
▸ No user interaction via Front Panel