Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.4
Lake-enabled Amplier Reference
261
▸ DURATION – Displays ACTIVE while the fault/warning is active. Once the fault/warning becomes
inactive, the duration for which it was active is displayed. Once the event is cleared, its line of text in
the log changes color from white to gray.
▸ FRAME – Identies the Frame in which the fault/warning/event occurred by displaying the Frame label.
If a Frame label has not been allocated, this eld displays the default model name e.g. 10000Q.
▸ MODULE – Displays the name of the Module in which the event occurred. This will be the default
name (i.e. 3way, 2aux, etc.) if the Module has not been renamed.
▸ CHANNEL – Indicates the channel on which the event occurred. This column will be blank if the event
was a Frame event – e.g. network failure, etc.
▸ DESCRIPTION – Displays a description of the event. A full list of the possible warning messages can be
found in the relevant Operation Manual.
20.11.2 Sorting Options
The default list order for the data displayed in the event log is chronological, with the most recent event at
the bottom of the list. To sort the data by another column, tap the button at the top of the required column.
20.11.3 Filtering Options
The default event log records and displays all events for all Modules and Frames in the system. To reduce
the number of log entries displayed, apply the lter options on the right of the screen. Regardless of ltering
options currently selected, all events are recorded, and may be displayed later as required.
20.11.3.1 Severity
Recorded events are divided into three categories: FAULTS, WARNINGS and USER ACTIONS. Events in any
or all of these categories may be displayed in the log by tapping the three buttons in the SEVERITY box. The
ALL button restores the default state of all three categories being selected.
20.11.3.2 Source
Using buttons in the SOURCE box, events may also be ltered on the basis of which part of the system
generated them. Any or all of six event sources may be selected, as follows:
▸ Loudspeaker Identication
▸ Loudspeaker Temperature
▸ Amplier Device