Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.4

EQ/Levels Menu Reference

FILTER FLAT is inactive if the selected overlay does not contain any lters.

6. 3.12 Filter Delete

Tap FILTER DELETE to remove the selected lter from the overlay.

A PEQ lter can be deleted by dragging the lter box

upward off the screen

FILTER DELETE is inactive if the selected overlay is a:

▸ Graphic EQ, because its lter points are xed and cannot be deleted

▸ Parametric EQ overlay without any lters

6. 3.13 Analyzer Tap to Search

The Lake Controller can interface directly with certain audio analyzer software programs that are installed on

the same computer, or on another computer on the same network.

When the analyzer is enabled, and a compatible audio analyzer is online and on the same network, the

Lake Controller provides spectrum, spectrograph, and transfer function displays on the XOVER, Aux, and EQ

overlays.

6. 3.14 High-Precision Filter Adjustments

Double-tap the lter parameters box so it turns from its normal appearance to a gray outline and gray text.

This switches from Normal Adjustment to Fine Adjustment mode. To return to Normal Adjustment mode,

tap the lter box once. Fine Adjustment mode is also implemented globally when Show mode is selected.

6.4 Crossovers and HPF/LPF

The XOVER and HPF/LPF screens display the crossover and/or HPF/LPF information for the selected

Module, depending on the Module type. The XOVER and HPF/LPF screens do not apply to Groups.

To view the XOVER screen:

1. Access EQ/LEVELS, and tap the EQ page tab at the top left of the screen.

2. Tap the XOVER or HPF/LPF tab next to Levels at the top of screen.