Lake Controller Operation Manual

94
Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
CROSSOVER COPY and CROSSOVER PASTE only
transfer the crossover and output EQ settings.
Levels and input EQ (PEQ/GEQ) will not be
transferred to the destination Module.
6.4.5 Crossover Split/Crossover Combine/Alignment Delay
This button’s label depends on the state of the currently selected crossover and the Module type. A classic
crossover Module will read CROSSOVER SPLIT / CROSSOVER COMBINE; a linear phase Module will read
ALIGNMENT DELAY.
6.4.5.1 Crossover Split
The label reads CROSSOVER SPLIT when a lter box is selected for a classic crossover that is currently
combined. This function separates the HPF and LPF of a classic crossover, enabling independent adjustment
of the crossover frequency and type.
To split a crossover, tap a crossover lter box, then tap CROSSOVER SPLIT.
CROSSOVER SPLIT is not applicable for linear
phase crossovers.
6.4.5.2 Crossover Combine
The label reads CROSSOVER COMBINE when a lter box is selected for a classic crossover that is currently
split. This function joins the separated classic crossover lters together based on the frequency and type of
the currently selected lter.
To combine a previously split crossover, select the crossover lter box you wish to use, then tap
CROSSOVER COMBINE.
CROSSOVER COMBINE is not applicable for linear
phase crossovers.