Operation Manual

34
Front Panel Interface
PLM Series Operation Manual Rev 1.3.0
7.7 Exit Button
In Menu Mode, pressing the EXIT button returns back one menu level. In Meter Mode, pressing EXIT
returns the display to the Home View.
7.8 Dynamic Buttons, Controls and LEDs
Figure 7-3: LCD with Dynamic Buttons, Controls and LEDs
7.8.1 Communication LED
This bright white LED signies selection in the Lake Controller, or Controller communication providing visual
conrmation of:
1. Network communication between the Lake Controller and the Lake Processor (Flashing LED).
2. Selection of the Lake Processor in the Lake Controller software (Steady LED).
The Communication LED can be dimmed via the
front panel by selecting Frame menu, and then
Front - Dimming.
7.8.2 Frame Faults and Warnings LED
This LED turns red to indicate a Frame fault and turns yellow to indicate a Frame warning. Additional clari-
cation of the fault or warning is displayed in the LCD. All mute, fault and warning states displayed on the
front panel are summarized in section 9.1.