Data Sheet
▸ >5000 W per channel @ 2.2 – 3.3 ohms
▸ 4400 W per channel @ 4 ohms
▸ 2U chassis weighing only 17 kg (37 lbs)
▸ Class TD
®
output stage
▸ Universal (70 - 265 V) Regulated Switch Mode Power Supply
(R.SMPS
™
) works anywhere in the world
▸ Power factor correction (PFC) helps maintain full output during ex-
tended power bursts
▸ Copper-nned Intercooler
®
with transverse-mounted output
devices
▸ Comprehensive loudspeaker preset database
▸ LoadSmart
™
load verication and SpeakerSafe
™
continuous loud-
speaker performance monitoring
▸ Dante
™
low-latency digital network included as standard
▸ Compatible with Lake LM 26, Dolby
®
Lake Processor and other
legacy Lake devices
▸ Primary and secondary network connections
▸ Digitally controlled “amplier gain” adjustable in 0.1 dB steps
▸ Digital output attenuation in 0.25 dB steps from -inf to 0 dB
▸ Binding post or Neutrik
®
speakON
®
output connectors
▸ Digitally implemented, zero-overshoot Inter-Sample Voltage Peak
Limiting (ISVPL
™
) adjustable in 0.1 V steps from 17.8 to 194 V
▸ Power Average Limiter (PAL) with software-controlled Breaker Emu-
lation Limiter (BEL
™
) prevents mains fuse tripping
▸ Under-Voltage Limiting (UVL
™
) enables continued operation with
mains voltage sags as low as 65 V
▸ High-brightness front-panel LCD display
▸ Moisture resistant silicone touchpad for front-panel display mode
selection and menu navigation
▸ Raised Cosine Equalization
™
▸ Linear phase and classical crossovers
▸ LimiterMax
™
– peak and RMS limiters
▸ Iso-Float
™
ground isolation
▸ Super Module capability
▸ Integration of third party frequency measurement and analysis sys-
tem via the Lake Analyzer Bridge
▸ Analog and AES digital inputs with loop-thru outputs
▸ Auto-select input router for all inputs with user denable priorities
PLM 20000Q Powered Loudspeaker Management System
The PLM 20000Q Powered Loudspeaker Management system
seamlessly integrates an extraordinarily powerful four-channel amplier
platform with Lake
®
Processing, Dante networked signal distribution,
accurate load verication and real-time performance monitoring.
Engineered as a unied system, the PLM 20000Q affords signicant
advantages - in sonic performance, user functionality, inventory
utilization, and long-term cost savings - when compared to conventional
approaches using separate components. The two-input, four-output PLM
20000Q features a software-controlled bridge mode, allowing one or both
adjacent channel pairs to be coupled for two or three output channels with
a power rating of 9600 W (@ 4 ohms) on the bridged outputs.
Lab.gruppen Technology
Lake Processing Technology
PLM 20000Q
Technical Data
PLM™ Series: Powered Loudspeaker Management
WWW.LABGRUPPEN.COM