Manual
Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
105
5. Select the HPF by tapping its lter box located top left of the screen.
6. Select the 18dB BUTTERWORTH lter from scroll bar.
7. Tap FILTER SET, then YES to the warning message.
8. Tap AUX OUTPUT EXIT to return to the EQ/LEVELS menu.
Steep high-pass and low-pass lters (48 dB) require
more EQ resources than shallower slopes (6 dB).
6.5.5 Auxiliary Output Menu Options
The menu options shown in Figure 6-23 are available when an EQ lter is selected on an Auxiliary Output in
the EQ/Levels section of an Auxiliary Output Module.
Figure 6-23: Auxiliary Output Button Bar
A summary of the functions relevant to Auxiliary Outputs is shown below; many are identical to those used
on the EQ and XOVER screens.
6.5.5.1 Home
Navigate back to the HOME menu.
6.5.5.2 EQ/Levels EXIT
Navigates to HOME menu, or I/O CONFIG if the current screen accessed via interactive block diagram.
6.5.5.3 Aux Output Functions
Provides EQ preferences, high-pass and low-pass lter options, and OVERLAY COPY/PASTE (and overlay
access controls in Designer Mode).
6.5.5.4 Aux Output Flat
Deletes all EQ lters and disables HPF, and LPF lters on the selected auxiliary output channel.