Manual
Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
117
8. Modules Menu Reference
From the HOME menu, tap MODULES. The Modules menu and scroll bar appear as shown below. The
scroll bar shows all Lake devices connected to the network.
Figure 8-1: Modules Menu and Scroll Bar
The scroll bar pictured above displays the following (from left to right):
▸ Virtual Frames folder, containing all device congurations for creating systems ofine
▸ Two Modules of a PLM 14000 that are available on the network but not used in the current system
▸ Two Modules of a Lake LM 26, and four Modules of a D200:4L that are in use in the current system
If many devices are available, tap and drag the scroll bar to the left/right, or tap the blue << or >> buttons.
Most options on the button bar appear gray (inactive) until a Module is placed from the scroll bar onto the
Main page.
Devices are sorted by product type, followed by
alphabetical Frame name order on the Module scroll
bar..
8.1 EQ/Levels
Navigate to the Modules menu, and tap the EQ/Levels button to display the parametric EQ, graphic EQ,
XOVER, and LEVELS screens for the selected Module. This function is active only when a Module has been
selected in the work area. For more information, please refer to section 6.1.
8.2 I/O Cong
The I/O CONFIG screen provides access to I/O Conguration, Technical Information and Input Router
Mutes; it also provides an interactive signal path that can be used to directly navigate to the LEVELS/EQ/
XOVER screens, and the ability to reset or congure the device.
To view the I/O CONFIG screen:
1. From HOME, access the MODULES menu.