Manual

Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
147
8.2.10.10 Serial Number:
Displays the hardware serial number for the selected device.
8. 2 .11 Input Router Mutes
Input Router Mutes represent the actual inputs to the device. Muting an input via Input Router Mutes will
mute the signal to all Modules that are connected to that Input Router. To display the Input Router Mutes
tool-bar:
▸ Tap INPUT ROUTER MUTES (F6) from the button bar on the I/O CONFIG screen
▸ Tap the INPUT ROUTER MUTES zoom button from the Levels screen
The buttons describe the current status. An input with a red button labelled MUTED is currently muted and
may be tapped to unmute the input. A button labelled UNMUTED is currently unmuted and may be tapped
to mute the input.
Figure 8-28: Input Router Mutes
Input Router Mutes are not available when a device
is ofine.
8. 2 .12 Interactive Signal Path Block Diagram
The signal path of each Module is shown in graphical form on the right of the I/O CONFIG page. Each of the
blocks can be selected to navigate directly to the associated EQ/LEVELS/XOVER/AUX/HPF/LPF screens.
After using the interactive block diagrams to access
the other screens, the EQ/LEVELS EXIT button
returns you to the I/O CONFIG page instead of
HOME.