Manual

152
Lake Controller Operation Manual Rev 1.5.4
Modules Menu Reference
Pressing the ME/SEL button on the front panel will identify the selected destination Frame with yellow
highlighting.
Please refer to the notes in section 8.4.3 for rules relating to which products are compatible with each other
for Batch Frame Replace.
Figure 8-29: Batch Replace Screen
8.4.5.1 Assigning the Virtual Frames to the Destination Frames
With the exception of very small systems, the virtual/ofine Frame must be labeled to enable Frame identi-
cation. If the destination Frame of the same product type and conguration is also labeled with a matching
name, the assignment will be automatic. Tapping START REPLACE will transfer data to the associated
online Frames.
If the destination Frames are not labeled:
1. Type the corresponding ofine/Virtual Frame number into the # eld, either via the on-screen or a
manual keyboard.
2. The destination Frame will move up or down the list so that it is on the same row as its corresponding
ofine/Virtual Frame.