Manual
250
Lake Controller Operation Manual Rev 1.5.4
Lake-enabled Amplier Reference
The SELECT/DESELECT ALL button toggles states to either select or deselect all channels on the selected
Module.
With a single channel selected, clicking the graph
will display the time and sample number for that
sample on the status line.
A white dot is displayed on the graphs if a
powercycle of the Frame was performed during
the sampling period.
20.8 Events Tab
The MODULE EVENTS tab shown in Figure 20-7 lists all faults and warnings occurring in the power output
channels allocated to the selected Module.
The EVENT LOG displayed on this screen is the same as that displayed via GLOBAL EVENTS with lters
applied to only display events relevant to the currently selected Module, power output channels assigned to
that Module, and the Frame/s incorporating those channels. The tab is identical in format and function to the
GLOBAL EVENTS tab. Please refer to section 20.11 for further details.
Figure 20-7: Module Events Tab