Manual

52
Lake Controller Operation Manual Rev 1.5.4
Lake Controller Tutorial
5. Change the center frequency of the parametric lter by tapping and dragging inside the vertical divider
lines of the EQ tool.
6. Drag the parametric lter into the same frequency range as the GEQ2 lters to see the result of all the
lters (the white composite line in the previous gure).
4.4.6 Add a New EQ Overlay
To add a new EQ overlay:
1. Tap EQ OVERLAY FUNCTIONS.
2. Tap EQ OVERLAY NEW.
By default, a new overlay is parametric but can be changed to graphic by tapping the EQ OVERLAY GEQ
button. You can also change an overlay from graphic to parametric by tapping this same button, which will
read EQ OVERLAY PEQ in this instance.
4.4.7 Mesa Filter
The Mesa lter is a highly versatile lter that can rapidly adjust a loudspeaker’s frequency response. The
Mesa lter provides a fast, effective optimization tool that truly matches a loudspeaker’s asymmetric
response. The Mesa lter allows independent adjustment of the slopes and center frequencies of the lower
and higher edges.
To add a Mesa lter to the new PEQ3 overlay:
1. Tap the Mesa lter type at the top of the EQ interface.
2. Tap the EQ display near the frequency you wish to insert the Mesa lter.