Manual
Lake Controller Operation Manual Rev 1.5.4
Lake Controller Tutorial
55
Crossover frequency and type and post-crossover equalization can be adjusted. In the default three-way
conguration, the Contour Module has 24 dB Linkwitz-Riley crossovers with center frequencies set at 250
Hz and 1.6 kHz. Tap the XOVER tab to view the crossover interface.
Figure 4-46: Crossover Screen
The low-output crossover is selected in this example. Use the crossover tool to change the center fre-
quency. The low and high parts of the crossover are currently combined. Tap the CROSSOVER SPLIT button
to split the crossover, and drag the CROSSOVER SELECTor tool left to reduce the frequencies sent to the
low output.
Figure 4-47: Splitting and moving the low channel HPF
Parametric lters (with the exception of the Mesa lter) can be added to further modify the crossover. Add a
parametric lter near the center frequency of the low-output crossover.