Manual

Lake Controller Operation Manual Rev 1.5.4
EQ/Levels Menu Reference
75
Figure 6-6: Composite EQ Curve
6. 3.1 Default Overlays
Modules and Groups both use the same EQ overlays and EQ functions. If a Module is assigned to a Group,
the Group EQ overlays can be viewed from the Module but cannot be updated. Changes to Group EQ are
performed by accessing the Group’s controls.
By default, a Module has parametric (PEQ1) and graphic EQ (GEQ2); a Group has a single parametric EQ
(PEQ1). A small gray dot to the bottom right of these EQ OVERLAY LABELs signies they are default
overlays that cannot be removed.
Figure 6-7: PEQ1 Tab
6.3.2 EQ Overlay Properties
A system designer can:
▸ Hide specic overlays
▸ Hide all overlays throughout the system
▸ Set specic overlays to View Only
▸ Set all overlays to View Only
It is important to be aware that there may be an overlay present that affects the overall EQ curve, but is not
accessible by the end user
6.3.3 Parametric EQ Screen
Figure 6-8 shows a parametric EQ (PEQ1) screen, including letters marking its key functions.