Manual

9. Appendix
PLM+ SERIES Operation Manual rev 1.0.0
69
9.3.2. Input and Router Defaults
Autoselect: On
Input sensitivity: +26 dBu
Dante: Disabled
AES3: Terminated
Iso-Float: Enabled
Router 1: Priority 1 = Dante Receiver (Ch.1)
Priority 2 = Dante Receiver (Ch.5)
Priority 3 = AES1 (Ch.1)
Priority 4 = Analog 1
Router 2: Priority 1 = Dante Receiver (Ch.2)
Priority 2 = Dante Receiver (Ch.6)
Priority 3 = AES1 (Ch.2)
Priority 4 = Analog 2
Router 3: Priority 1 = Dante Receiver (Ch.3)
Priority 2 = Dante Receiver (Ch.7)
Priority 3 = AES1 (Ch.3)
Priority 4 = Analog 3
Router 4: Priority 1 = Dante Receiver (Ch.4)
Priority 2 = Dante Receiver (Ch.8)
Priority 3 = AES1 (Ch.4)
Priority 4 = Analog 4
9.3.3. Amplifier and Device Defaults
Attenuation: 0 dB
Polarity: Positive (In phase)
Mutes: Unmuted
Load Model: No Load Model
Breaker Emulation Limiter: PLM 20K44 - 32A
PLM 12K44 - 25A
IP Conguration: Auto Zero Conf. (Auto IP)
Dual Redundancy: Disabled
Dante Slave Only: Enabled