Lake Controller Operation Manual

104
Lake Controller Operation Manual Rev 1.5.9
EQ/Levels Menu Reference
6.5.1.7 Classic 2-Way + 1-Auxiliary Outputs
The Classic 2-Way + 1-Auxiliary Outputs Module may be recalled into any Module. The other Modules of
the Frame may contain any Classic or Linear Phase Module that uses two or three output channels.
6.5.1.8 Classic 3-Way + 1-Auxiliary Outputs
The Classic 3-Way + 1-Auxiliary Outputs Module may be recalled into Module A or C. When loading this
Module type, and option to load either the Classic 2-Way or 2-Auxiliary Outputs Module into Module B/D
will be provided. No other combinations are allowed.
6.5.1.9 Linear Phase Brick Wall 2-Way + 1-Auxiliary Outputs
The Linear Phase 2-Way + 1-Auxiliary Outputs Module may be recalled into any Module. The other Modules
of the Frame may contain any Classic or Linear Phase Module that uses two or three output channels.
6.5.2 Using Auxiliary Outputs
To congure a Module for output-specic EQ, rst load an Auxiliary Output le into a Module.
1. From Home, tap MODULES.
2. Place Module A of a Frame on the MAIN page, or select an existing Module.
3. Tap MODULE STORE/RECALL.
4. Select an Auxiliary Output le from the scroll bar, and tap RECALL.
5. Read and tap YES to both warning messages.
Figure 6-19: Loading an Auxiliary Output le
6. After loading an Auxiliary Output Module le, access EQ/LEVELS for this Module by tapping
STORE/RECALL EXIT, then tap EQ/LEVELS