Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
108
Lake Controller Operation Manual Rev 1.5.9
EQ/Levels Menu Reference
6.5.5.2 EQ/Levels EXIT
Navigates to HOME menu, or I/O CONFIG if the current screen accessed via interactive block diagram.
6.5.5.3 Aux Output Functions
Provides EQ preferences, high-pass and low-pass lter options, and OVERLAY COPY/PASTE (and overlay
access controls in Designer Mode).
6.5.5.4 Aux Output Flat
Deletes all EQ lters and disables HPF, and LPF lters on the selected auxiliary output channel.
6.5.5.5 Filter Bypass / Filter Insert
Bypasses or inserts a selected EQ lter (not applicable to high-pass and low-pass lters).
6.5.5.6 Filter Flat
Resets the gain of the selected EQ lter to zero. Frequency and bandwidth are unchanged (not applicable for
high-pass and low-pass lters).
6.5.5.7 Filter Delete
Deletes the selected EQ lter (not applicable for high-pass and low-pass lters).
6.5.5.8 Filter Edit
Allows keyboard entry of gain, frequency, and bandwidth values for EQ lters (frequency only for high-pass
and low-pass lters). Tap the required value at the top of the screen (highlighted in blue) to edit using the
on-screen (or external) keyboard.
6.5.5.9 Analyzer Ready / Analyzer Unavailable
Please refer to section 6.3.14 for details on this function.
After selecting AUX OUTPUT FUNCTIONS, the following menu is displayed: