Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
112
Lake Controller Operation Manual Rev 1.5.9
System Store Recall Menu Reference
7.3 Recall as New System—Open
The function and label of the button depend on whether a folder or le is selected. The button is inactive
when neither a le nor folder is selected.
The button is labeled OPEN when a folder is selected.
To open a folder:
1. Tap the desired folder icon
The selection is indicated by a yellow border.
2. Tap OPEN. Double-tapping the folder icon also opens the folder.
The button is labeled RECALL AS NEW SYSTEM when a le is selected; recalling the le will clear all
current settings from the Controller and load the details stored in the le into the associated devices.
To recall a system conguration le as a new system:
1. Tap the desired le to recall.
2. Tap RECALL AS NEW SYSTEM.
3. Conrm the action by tapping the YES button on the warning message.
RECALL AS NEW SYSTEM overwrites current settings
in associated Lake devices and will affect audio
processing. Presets stored in hardware devices are not
overwritten during a system le recall.
7.4 Recall as Subsystem
RECALL AS SUBSYSTEM enables the content of a system conguration le to be added to the current
system conguration.
This function adds the Modules, Super Modules, and Groups to your current conguration, or replaces
the data if the device is already in use. This function does not automatically arrange icons so they do not
overlap. Be careful to either move existing icons before loading a sub-system, or ensure icons are placed
appropriately in the stored les.
7.5 Recall Compare
RECALL COMPARE enables comparison of a system conguration le with the system conguration that is
currently active in the Lake device. This button is active only when a le is selected.