Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
114
Lake Controller Operation Manual Rev 1.5.9
System Store Recall Menu Reference
7.7 Store System
The STORE SYSTEM button stores the entire system conguration. If a le is selected on the scroll bar, the
name of that le will appear in the on-screen keyboard, allowing the le to be overwritten or for a le name
variation to be used.
1. Tap STORE SYSTEM.
2. Conrm the action by tapping the YES button in the warning message
If the selected le is set to read only, the STORE
SYSTEM function is inactive (gray).
7.8 Store Subsystem
The STORE SUBSYSTEM button stores the selected Modules, Super Modules, and Groups as a subsystem.
Only the data from the selected Modules, including Group assignments, will be stored in the le.
1. Navigate the le system, and tap the desired destination folder to select it.
2. Select the required Modules, Super Modules, and Group icons.
3. Tap STORE SUBSYSTEM.
4. Enter the le name using the on-screen keyboard (or an external keyboard).
5. Tap OK.
The scroll bar displays the new le.
7.9 File Utilities
This button provides a submenu containing further functions that manage les and folders from within the
Lake Controller.
7.9.1 Open
This button is active only when a folder is selected. Tap Open to open the selected folder.