Lake Controller Operation Manual

142
Lake Controller Operation Manual Rev 1.5.9
Modules Menu Reference
Auxiliary Input Toggle Switch
An auxiliary channel is available on the following Module types:
▸ Classic 2-Way + 1-Auxiliary Outputs (CL2w+1a)
▸ Classic 3-Way + 1-Auxiliary Outputs (CL3w+1a)
▸ Linear Phase Classic 2-Way + 1-Auxiliary Outputs (LP2w+1a)
The interactive block diagram for these Modules types looks similar to that shown in Figure 8-21.
Figure 8-21: 2-Way + 1-Auxiliary Outputs Block Diagram and Input Mixers
These Module types provide a separate input selector for the auxiliary channel. This allows the auxiliary
channel to be sourced independently of the crossover, or from the same post-input EQ signal.
The input EQ (PEQ/BLEQ/GEQ) overlays will also
affect the auxiliary output channel when the input
switch is set as shown in Figure 8-21.
Simplied View Input Toggle (MY8-LAKE Mesa Mode Only)
For an MY8-LAKE in Mesa Mode, the default I/O conguration view is set to Simplied View. In this view,
either the Host output or AES input can be selected as the source input signal. The Input Mixer and Input
Router are not available; the input selector toggles between Host Output and AES Input.