Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
164
Lake Controller Operation Manual Rev 1.5.9
Modules Menu Reference
Figure 8-32: Super Modules
8.8.2 Super Module EQ/Levels or Module EQ/Levels
These functions enable you to view or change the EQ levels of a Module or Super Module. When a Module
is selected, you change only the EQ and level of that Module. When a Super Module is selected, you
change the EQ and level for all Modules contained in that Super Module. See chapter 6 for more information
on EQ/Levels.
To view the EQ/Levels of a Module or Super Module, tap the Module or Super Module to select it, then tap
SUPER MOD EQ/LEVELS or MODULE EQ/LEVELS.
8.8.3 SM Routing: I/O Cong
This button reads I/O CONFIG when a Module is selected and SM ROUTING when a Super Module is
selected. For further information on the I/O CONFIG option, please refer to section 8.2.
The SM ROUTING function displays the Super Module output routing pop-up window. It shows each of the
elemental Modules contained in the Super Module and its available output routing options.