Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
210
Lake Controller Operation Manual Rev 1.5.9
Analyzer Plug-in
Figure 18-3: Example network conguration
For further information on networking and hardware conguration, please refer to chapter 3 of this Opera-
tion Manual and your hardware device Operation Manual.
18.2 System Requirements
To use the analyzer plug-in, the following items are required:
1. A Microsoft
®
Windows
®
PC with a fully registered installation of an approved analyzer meeting the
computer requirements for the analyzer. Supported analyzers include:
▸ Rational Acoustics
®
Smaart
®
v7 / v7 Di / v8.0.2 and newer
▸ AFMG
®
SysTune
▸ WaveCapture
™
Live‐Capture
™
Light / Live-Capture Pro
▸ Additional third-party analyzers approved in the future